Country Flags IBS Electronics USA IBS Electronics Mexico IBS Electronics Philippines IBS Electronics China IBS Electronics Malaysia IBS Electronics India IBS Electronics Hong Kong IBS Electronics Singapore
Home > Semiconductors > ICs > Analog Devices AD544JH IC OP-AMP, 2000uV OFFSET-MAX, 2MHz BAND WIDTH, MBCY8

Analog Devices AD544JH IC OP-AMP, 2000uV OFFSET-MAX, 2MHz BAND WIDTH, MBCY8

Be the first to review this product

Availability: In stock

Only 2 left

$0.0000
OR

Quick Overview

Analog Devices AD544JH ADI High Performance, BiFET Operational Amplifiers OP-AMP, 2000uV OFFSET-MAX, 2MHz BAND WIDTH, MBCY8

Analog Devices AD544JH IC OP-AMP, 2000uV OFFSET-MAX, 2MHz BAND WIDTH, MBCY8

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

Analog Devices, Inc IC, Op Amp, Voltage Feedback, single, AD544JH

AD544JH Analog Devices IC High Performance, BiFET Operational Amplifiers

The BiFET series of precision, monolithic FET-input op amps are fabricated with the most advanced BiFET and laser trimming technologies. The AD542, AD544, AD547 series offers bias currents significantly lower than currently available BiFET devices, 25 pA max, warmed up.

In addition, the offset voltage is laser trimmed to less than 0.25 mV on the AD547L, which is achieved by utilizing Analog exclusive laser wafer trimming (LWT) process. When combined with the AD547's low offset drift (1µV/°C), these features offer the user performance superior to existing BiFET op amps at low BiFET pricing.

AD542 or AD547 is recommended for any operational amplifier application requiring excellent dc performance at low to moderate cost. Precision instrument front ends requiring rate amplification of millivolt level signals from megohm source impedances will benefit from the device's excellent combination of low offset voltage and drift, low bias current and low 1/f noise. High common-mode rejection (80 dB, min on the "K" and "L" grades) and high open-loop gain, even under heavy loading, ensures better than "12-bit" linearity in high impedance buffer applications.

The AD544 is recommended for any op amp applications requiring excellent ac and dc performance at low cost. The 2 MHz bandwidth and low offset of the AD544 make it the first choice as an output amplifier for current output D/A converters, such as the AD7541, 12-bit CMOS DAC.

Devices in this series are available in four grades: the "J," "K," and "L" grades are specified over the 0°C to +70°C temperature range and the "S" grade over the -55°C to +125°C operating temperature range. All devices are offered in the hermetically sealed, TO-99 metal can package.
SPECIFICATIONS
Part #: AD544JH
Part Category: Amplifiers
Manufacturer: Analog Devices, Inc.
Description: OP-AMP, 2000uV OFFSET-MAX, 2MHz BAND WIDTH, MBCY8
Mfr Package Description HERMETICALLY SEALED, METAL CAN, TO-99, 8 PIN
REACH Compliant Yes
Status Discontinued
Amplifier Type OPERATIONAL AMPLIFIER
Architecture VOLTAGE-FEEDBACK
Average Bias Current-Max (IIB) 5.00E-5 µA
Bias Current-Max (IIB) @25C 5.00E-5 µA
Common-mode Reject Ratio-Nom 76 dB
Common-mode Reject Ratio-Min 76 dB
Frequency Compensation YES

Additional Information

AD544JH
Click here to Download Datasheet I
© 1994 - 2019 IBS Electronics Inc. All rights Reserved.    •    Call Now: 1-800-717-6475     Go to Top  Go to Top of Page