Country Flags IBS Electronics USA IBS Electronics Mexico IBS Electronics Philippines IBS Electronics China IBS Electronics Malaysia IBS Electronics India IBS Electronics Hong Kong IBS Electronics Singapore
Home > Semiconductors > ICs > Microsemi JM38510/10703BXC STANDARD REGULATOR POS 12V 2.4A 3-PIN TO-39

Microsemi JM38510/10703BXC STANDARD REGULATOR POS 12V 2.4A 3-PIN TO-39

Be the first to review this product

Availability: In stock

Only 5 left

$0.0000
OR

Quick Overview

Msc - Mil Jm38510/10703Bxc Voltage Regulator Pos 12V 0.5Amp. Military 140H -1.35900339750849E-02 IC

Microsemi JM38510/10703BXC STANDARD REGULATOR POS 12V 2.4A 3-PIN TO-39

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

Microsemi - Military Specification JM38510/10703BXC FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR 12V 140H -1.35900339750849E-02 Regulator Pos 12V 1.7A 3-Pin TO-39

 

Polarity Positive
Number of Outputs 1
Maximum Input Voltage 50 V
Maximum Output Current 1.7 A
Output Voltage 12 V
Typical Dropout Voltage @ Current 2@500mA V
Accuracy ±1.5 %
Line Regulation 60 mV
Load Regulation 80 mV
Maximum Quiescent Current 6 mA
Operating Temperature -55 to 125 °C
Mounting Surface Mount
Output Type Fixed
Category Linear Regulator
Manufacturer Microsemi

The SG78xxA/SG78xx series of positive regulators offer self-contained, fixed-voltage capability with up to 1.5 A of load current and input voltage up to 50 V (SG78xxA series only). These units feature a unique on-chip trimming system to set the output voltages to within ±1.5% of nominal on the SG78xxA series with ±2.0% on the SG78xx series. The SG78xxA versions also offer much improved line and load regulation characteristics. Utilizing an improved bandgap reference design, problems such as drift in output voltage and large changes in the line and load regulation, that are normally associated with the Zener diode references have been eliminated. All protective features of thermal shutdown, current limiting, and safe-area control have been designed into these units and since these regulators require only a small output capacitor for satisfactory performance, ease of application is assured. Although designed as fixed-voltage regulators, the output voltage can be increased through the use of a simple voltage divider. The low quiescent drain current of the device ensures good regulation when this method is used. Product is available in hermetically sealed TO-257 (both case grounded ‘G’ and isolated ‘IG’), TO-3, TO-39 and leadless chip carrier (LCC) packages.

Additional Information

JM38510/10703BXC
© 1994 - 2019 IBS Electronics Inc. All rights Reserved.    •    Call Now: 1-800-717-6475     Go to Top  Go to Top of Page