Country Flags IBS Electronics USA IBS Electronics Mexico IBS Electronics Philippines IBS Electronics China IBS Electronics Malaysia IBS Electronics India IBS Electronics Hong Kong IBS Electronics Singapore
Home > Semiconductors > ICs > PHILIPS 74F374D Octal D-type Flip-flop With Tri-state Outputs SOIC-20

PHILIPS 74F374D Octal D-type Flip-flop With Tri-state Outputs SOIC-20

Be the first to review this product

Availability: In stock

Only 76 left

$0.0900
OR

Quick Overview

PHILIPS 74F374D OCTAL D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS

PHILIPS 74F374D Octal D-type Flip-flop With Tri-state Outputs SOIC-20

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

PHILIPS 74F374D IC: digital; D flip-flop; Channels:8; THT; 20 Pins; Series: F

The 74F373 is an octal transparent latch coupled to eight 3-State output devices. The two sections of the device are controlled independently by enable (E) and output enable (OE ) control gates.

This is a high-speed low-power octal D-type flip-flop featuring separate D-type inputs for each flip-flop and TRI-STATE outputs for bus-oriented applications A buffered Clock (CP) and Output Enable (OE) are common to all flip-flops

Overview

The 74F574 is functionally identical to the 74F374 but has a broadside pinout configuration to facilitate PC board layout and allow easy interface with microprocesors.

It is an 8-bit, edge triggered register coupled to eight 3-State output buffers. The two sections of the device are controlled independently by the clock (CP) and Output Enable (OE) control gates.

The register is fully edge-triggered. The state of each D input, one setup time before the Low-to-High clock transition is transferred to the corresponding flip-flop’s Q output.

The 3-State output buffers are designed to drive heavily loaded 3-State buses, MOS memories, or MOS microprocessors. The active Low Output Enable (OE) controls all eight 3-State buffers independently of the latch operation. When OE is Low, the latched or transparent data appears at the outputs. When OE is High, the outputs are in high impedance “off” state, which means they will neither drive nor load the bus.

Features

  • Broadside pinout version of 74F374
  • Inputs and Outputs on opposite side of package allow easy interface to Microprocessors
  • Useful as an Input or Output port for Microprocessors
  • 3-State Outputs for Bus interfacing
  • Common Output Enable
  • 74F564 is the inverting version of 74F574
  • 3-State Outputs glitch free during power-up and power-down
  • High-Speed replacements for N8TS806

Additional Information

74F374D
Manufacturer: Philips (Acquired by NXP Semiconductors)
Click here to Download Datasheet I
© 1994 - 2019 IBS Electronics Inc. All rights Reserved.    •    Call Now: 1-800-717-6475     Go to Top  Go to Top of Page