Country Flags IBS Electronics USA IBS Electronics Mexico IBS Electronics Philippines IBS Electronics China IBS Electronics Malaysia IBS Electronics India IBS Electronics Hong Kong IBS Electronics Singapore
Home > Semiconductors > Logic ICs > Encoders, Decoders, Multiplexers & Demultiplexers > Philips 74HCT4052D Dual 4-Channel Analog Multiplexer/Demultiplexer 180MHz 5.5 V SOIC-16

Philips 74HCT4052D Dual 4-Channel Analog Multiplexer/Demultiplexer 180MHz 5.5 V SOIC-16

Be the first to review this product

Availability: In stock

Only 1520 left

$0.4000
  • Buy 10 for $0.2500 each and save 38%
  • Buy 50 for $0.2400 each and save 40%
  • Buy 100 for $0.2300 each and save 43%
  • Buy 500 for $0.2200 each and save 45%
  • Buy 1000 for $0.2100 each and save 48%
  • Buy 2000 for $0.1800 each and save 55%
OR

Quick Overview

74HCT4052D Philips Integrated Circuits (ICs) Dual 4-channel analog multiplexer/demultiplexer 2 Circuit IC Switch 4:1 150 Ohm 16-SO

Philips 74HCT4052D Dual 4-Channel Analog Multiplexer/Demultiplexer 180MHz 5.5 V SOIC-16

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

Philips 74HCT4052D Dual 4-Channel Analog Multiplexer/Demultiplexer 180MHz 5.5 V SOIC-16
The 74HCT4052D is a Dual 4-channel analog multiplexer/demultiplexer with high-speed Si-gate CMOS.

Its core supply voltage ranges from 4.5 V to 5.5 V.it is pin compatible with low-power schottky TTL(LSTTL).

Features:

Wide analog input voltage range from -5 V to +5 V
Low ON resistance:
80 O(typical) at VCC - VEE = 4.5 V
70 O (typical) at VCC - VEE = 6.0 V
60 O (typical) at VCC - VEE = 9.0 V
Logic level translation: to enable 5 V logic to communicate with -5 V analog signals
Typical ‘break before make’ built-in
ESD protection:
HBM JESD22-A114F exceeds 2000 V
MM JESD22-A115-A exceeds 200 V
CDM JESD22-C101E exceeds 1000 V
Multiple package options
Specified from -40°C to +85°C and -40°C to +125°C

Applications:

Analog multiplexing and demultiplexing
Digital multiplexing and demultiplexing
Signal gating

The 74HC4052; 74HCT4052 is a dual single-pole quad-throw analog switch (2x SP4T) suitable for use in analog or digital 4:1 multiplexer/demultiplexer applications. Each switch features four independent inputs/outputs (nY0, nY1, nY2 and nY3) and a common input/output (nZ). A digital enable input (E) and two digital select inputs (S0 and S1) are common to both switches. When E is HIGH, the switches are turned off. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.

Additional Information

74HCT4052D
Manufacturer: Philips (Spun NXP Semiconductors)
Product Category: Multiplexer Switch ICs
Bandwidth: 180 Mhz
Product: Multiplexers/Demultiplexers
Number of Channels: 8 Channel
Configuration: 2 x 1:4
On Resistance - Max: 270 Ohms
On Time - Max: 105 ns
Off Time - Max: 75 ns
Operating Supply Voltage: 5 V
Maximum Operating Temperature: + 125 C
Mounting Style: SMD/SMT
Package / Case: SO-16
Brand: NXP Semiconductors
Pd - Power Dissipation: 500 mW
© 1994 - 2019 IBS Electronics Inc. All rights Reserved.    •    Call Now: 1-800-717-6475     Go to Top  Go to Top of Page