Country Flags IBS Electronics USA IBS Electronics Mexico IBS Electronics Philippines IBS Electronics China IBS Electronics Malaysia IBS Electronics India IBS Electronics Hong Kong IBS Electronics Singapore
Home > Circuit Protection > Diodes & Rectifiers > SMAJ30A Littelfuse Diode TVS Single Uni-Dir 30V 400W 2-Pin SMA

SMAJ30A Littelfuse Diode TVS Single Uni-Dir 30V 400W 2-Pin SMA

Be the first to review this product

Availability: Request a Quote

$0.4300

Quick Overview

Littelfuse SMAJ30A TVS Diodes - Transient Voltage Suppressors 30Vr 400W 8.3A 5% UniDirectional

SMAJ30A Littelfuse Diode TVS Single Uni-Dir 30V 400W 2-Pin SMA

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

SMAJ30A Littelfuse Diode TVS Single Uni-Dir 30V 400W 2-Pin SMA
TVS DIODE, 400W, 30V, DO-214AC, Product Range:SMAJ Series, TVS Polarity:Unidirectional, Reverse Stand-Off Voltage Vrwm:30V, Diode Case Style:DO-214AC, No. of Pins:2Pins, Breakdown Voltage Min:33.3V, Breakdown Voltage Max:36.8V , RoHS

The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.


400W Peak pulse power capability at 10/1000µs waveform, repetition rate (duty cycle): 0.01%
• Excellent clampingcapability
• Typical IR less than 1µA when VBR min>12V
• For surface mounted applications to optimize board space
• Low profile package
• Typical failure mode is short from over-specified voltage or current
• Whisker test is conducted based on JEDEC
JESD201A per its table 4a and 4c
• IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact)
• ESD protection of data lines in accordance with IEC 61000-4-2
• EFT protection of data lines in accordance with IEC 61000-4-4
• Built-in strain relief


Fast response time: typically less than 1.0ps from 0 Volts to VBR min
• Glass passivated junction
• Low inductance
• High temperature to reflow soldering guaranteed: 260°C/40sec
• VBR @ TJ = VBR@25°C x (1+aT x (TJ - 25))(aT:Temperature Coefficient, typical value is 0.1%)
• Plastic package is flammability rated V-0 per Underwriters Laboratories
• Meet MSL level1, per J-STD-020, LF maximun peak of 260°C
• Matte tin lead–free Plated
• Halogen free and RoHS compliant
• Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/JEDEC J-STD-609A.01)

Additional Information

SMAJ30A
Click here to Download Datasheet I
© 1994 - 2019 IBS Electronics Inc. All rights Reserved.    •    Call Now: 1-800-717-6475     Go to Top  Go to Top of Page