Country Flags IBS Electronics USA IBS Electronics Mexico IBS Electronics Philippines IBS Electronics China IBS Electronics Malaysia IBS Electronics India IBS Electronics Hong Kong IBS Electronics Singapore
Home > ICs > Discrete Semiconductors > Operational Amplifiers - Op Amps > Texas Instruments TLC274AID IC Quad Op Amp, 1.7MHz CMOS, 5 -15 V, 14-Pin SOIC

Texas Instruments TLC274AID IC Quad Op Amp, 1.7MHz CMOS, 5 -15 V, 14-Pin SOIC

Be the first to review this product

Availability: In stock

Only 1710 left

$1.8500
  • Buy 10 for $1.7500 each and save 6%
  • Buy 50 for $1.6500 each and save 11%
  • Buy 100 for $1.5500 each and save 17%
  • Buy 500 for $1.4500 each and save 22%
  • Buy 1000 for $1.4000 each and save 25%
  • Buy 2000 for $1.3100 each and save 30%
OR

Quick Overview

Texas Instruments - Ti TLC274AID Amplif IC Operational Amplifier (Op-Amp) IC; No. of Amplifiers:4; Slew Rate:3.6V/5s; No. of Pins:14; Operating Temperature Range:-550C to +1250C; Bandwidth Max:2.6MHz; Bias Current:600pA; Common Mode Ratio (CMR):65 dB

Texas Instruments TLC274AID IC Quad Op Amp, 1.7MHz CMOS, 5 -15 V, 14-Pin SOIC

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

Texas Instruments TLC274AID Quad LiNCMOS Operational Amplifiers High Bias SMT / SMD SOIC-14

The TLC274 and TLC279 quad operational amplifiers combine a wide range of input offset voltage grades with low offset voltage drift, high input impedance, low noise, and speeds approaching that of general-purpose BiFET devices.

These devices use Texas Instruments silicon- gate LinCMOSTM technology, which provides offset voltage stability far exceeding the stability available with conventional metal-gate processes.

The extremely high input impedance, low bias currents, and high slew rates make these cost-effective devices ideal for applications which have previously been reserved for BiFET and NFET products. Four offset voltage grades are available (C-suffix and I-suffix types), ranging from the low-cost TLC274 (10 mV) to the high-precision TLC279 (900 uV). These advantages, in combination with good common-mode rejection and supply voltage rejection, make these devices a good choice for new state-of-the-art designs as well as for upgrading existing designs.

In general, many features associated with bipolar technology are available on LinCMOSTM operational amplifiers, without the power penalties of bipolar technology. General applications such as transducer interfacing, analog calculations, amplifier blocks, active filters, and signal buffering are easily designed with the TLC274 and TLC279. The devices also exhibit low voltage single-supply operation, making them ideally suited for remote and inaccessible battery-powered applications. The common-mode input voltage range includes the negative rail.

A wide range of packaging options is available, including small-outline and chip-carrier versions for high-density system applications.

The device inputs and outputs are designed to withstand -100-mA surge currents without sustaining latch-up.

The TLC274 and TLC279 incorporate internal ESD-protection circuits that prevent functional failures at voltages up to 2000 V as tested under MIL-STD-883C, Method 3015.2; however, care should be exercised in handling these devices as exposure to ESD may result in the degradation of the device parametric performance.

The C-suffix devices are characterized for operation from 0°C to 70°C. The I-suffix devices are characterized for operation from -40°C to 85°C. The M-suffix devices are characterized for operation over the full military temperature range of -55°C to 125°C.

Additional Information

TLC274AID
© 1994 - 2019 IBS Electronics Inc. All rights Reserved.    •    Call Now: 1-800-717-6475     Go to Top  Go to Top of Page