Country Flags IBS Electronics USA IBS Electronics Mexico IBS Electronics Philippines IBS Electronics China IBS Electronics Malaysia IBS Electronics India IBS Electronics Hong Kong IBS Electronics Singapore
Home > Capacitors > Film Capacitors > WIMA FKP3-1000PF-630V-5% Polypropylene Film Capacitor 1000pF 630V 5% Disc

WIMA FKP3-1000PF-630V-5% Polypropylene Film Capacitor 1000pF 630V 5% Disc

Be the first to review this product

Availability: In stock

Only 700 left

$0.2500
  • Buy 10 for $0.2400 each and save 4%
  • Buy 50 for $0.2300 each and save 8%
  • Buy 100 for $0.2100 each and save 16%
  • Buy 500 for $0.1900 each and save 24%
  • Buy 1000 for $0.1700 each and save 32%
  • Buy 2000 for $0.1500 each and save 40%
OR

Quick Overview

WIMA FKP3-1000PF-630V-5% capacitor 1000pF 630V 5%

WIMA FKP3-1000PF-630V-5% Polypropylene Film Capacitor 1000pF 630V 5% Disc

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

WIMA FKP3-1000PF-630V-5% Polypropylene Film Capacitor 1000pF 630V 5% Radial Through Hole

Wima Polypropylene (PP) Film and Foil Capacitors for Pulse Applications in PCM 7.5 mm to 15 mm

Electrical Data
Capacitance range:
100 pF to 0.22 µF (E12-values on request)
Rated voltages:
63VDC, 100VDC, 250VDC, 400VDC, 630VDC, 1000VDC
Capacitance tolerances:
±20%, ±10%, ±5%
Operating temperature range:
-55°C to +100°C
Test specifications:
In accordance with IEC 60384-13
Climatic test category:
55/100/56 in accordance with IEC
Insulation resistance
at +20°C:
> 5 x 105 M (mean value: 1 x 106 M)
Measuring voltage:
Ur = 63V: Utest = 50 V/1 min.
Ur > 100V: Utest = 100 V/1 min.
Dissipation factors at +20°C: tan
Test voltage:
2 Ur, 2 sec
Maximum pulse rise time:
1000 V/µsec for pulses equal to the rated voltage
Dielectric absorption:
0.05%
Temperature coefficient:
-200 x 10-6/°C (typical)
Voltage derating:

A voltage derating factor of 1.35% per K must be applied from +85°C for DC voltages and from +75°C for AC voltages.
Reliability:
Operational life > 300000 hours
Failure rate < 5 fit (0.5 x Ur and 40°C)
at f C < 0.1 µF 0.1 µF < C < 0.22 µF
1kHz
10kHz
100kHz
< 4 x 10-4
< 5 x 10-4
<
10 x 10-4
< 3 x 10-4
< 6 x 10-4
-
 
Mechanical Tests   Packing
Pull test on pins:
10 N in direction of pins according to IEC 60068-2-21
Vibration:
6 hours at 10...2000Hz and 0.75mm displacement amplitude or 10g in accordance with IEC 60068-2-6
Low air density:
1kPa = 10 mbar in accordance with IEC 60068-2-13
Bump test:
4000 bumps at 390 m/sec2 in accordance with IEC 60068-2-29

Additional Information

FKP3-1000PF-630V-5%
© 1994 - 2017 IBS Electronics Inc. All rights Reserved.    •    Call Now: 1-800-717-6475     Go to Top  Go to Top of Page