Country Flags IBS Electronics USA IBS Electronics Mexico IBS Electronics Philippines IBS Electronics China IBS Electronics Malaysia IBS Electronics India IBS Electronics Hong Kong IBS Electronics Singapore
Home > Passive Components > Capacitors > WIMA Film Capacitor 0.047uF 63V 5% Radial

WIMA Film Capacitor 0.047uF 63V 5% Radial

Be the first to review this product

Availability: Request a Quote

$0.5000

Quick Overview

MKS2-.047/63/5 WIMA Film Capacitors 63V .047uF 5% Radial

WIMA Film Capacitor  0.047uF 63V 5% Radial

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

Specifications
Product Category: Film Capacitors
Manufacturer: WIMA
Series: MKS2
Termination Style: Radial
Product: General Film Capacitors
Dielectric: Polyester
Capacitance: 0.047 uF
Voltage Rating AC: 40 VAC
Voltage Rating DC: 63 VDC
Tolerance: 5 %
Lead Spacing: 5 mm
Minimum Operating Temperature: - 55 C
Maximum Operating Temperature: + 100 C
Length: 7.2 mm
Width: 2.5 mm
Height: 6.5 mm
Packaging: Bulk
Brand: WIMA
Capacitance - nF: 47 nF
Capacitance - pF: 47000 pF
Lead Diameter: 0.5 mm
Factory Pack Quantity: 500
Type: Metallized Polyester (PET) Capacitors PCM 5 mm

WIMA Film Capacitors .047uF 63 Volts 5%
Manufacturer: WIMA
Product Category: Film Capacitors
Brand: WIMA
Termination Style: Radial
Product: General Film Capacitors
Dielectric: Polyester
Capacitance: 0.047 uF
Voltage Rating AC: 40 V
Voltage Rating DC: 63 V
Tolerance: 5 %
Lead Spacing: 5 mm
Minimum Operating Temperature: - 55 C
Maximum Operating Temperature: + 100 C
Lead Diameter: 0.5 mm
Packaging: Ammo Pack
Series: MKS2

Electrical Data
Capacitance range:
0.01 µF to 10 µF (E12-values on request)
Rated voltages:
50VDC, 63VDC, 100VDC, 250VDC, 400VDC, 630VDC
Capacitance tolerances:
±20%, ±10%, ±5%
Operating temperature range:
Ur = 50 VDC: -55°C to +100°C
Ur > 63 VDC: -55°C to +125°C
Test specifications:
In accordance with IEC 60384-2
Climatic test category:
55/100/21 in accordance with IEC
Insulation resistance at +20°C:
  Test voltage: 1.6 Ur, 2 sec
Voltage derating:
A voltage derating factor of 1.25% per K must be applied from +85°C for DC voltages and from +75°C for AC voltages.
Reliability:
Operational life > 300000 hours (+125°C permitted for 1000 hours max. distributed over the entire operating life)
Failure rate < 2 fit (0.5 x Ur and 40°C)

Ur Utest C < 0.33 µF 0.33 µF< C < 10 µF
50 VDC 10 V >5 x 103 M
(mean value: 3x104M)
> 1000 sec (Mx µF)
(mean value: 3000 sec)
63 VDC 50 V >1 x 104 M
(mean value: 5x104M)
> 1250 sec (Mx µF)
(mean value: 3000 sec)
>100 VDC 100 V >1.5 x 104 M
(mean value: 1x105M)
> 3000 sec (Mx µF)
(mean value: 6000 sec)
Measuring time: 1 min.
Dissipation factors at +20°C: tan
at f C < 0.1 µF 0.1 µF< C < 1.0 µF C > 1.0 µF
1 kHz
10 kHz
100 kHz
< 8 x10-3
< 15 x10-3
<
30 x10-3
< 8 x10-3
< 15 x10-3
-
< 10 x10-3
-
-
Maximum pulse rise time: for pulses equal to the rated voltage
Capacitance
µF
Pulse rise time V/µsec
max.operation/test
50VDC 63VDC 100VDC 250VDC 400VDC 630VDC

0.01 ...0.022
0.033...0.068
0.1...0.47
0.68...1.0
1.5...3.3
4.7
6.8

10

-
-
10/100
8/80
8/80
5/50
3/30

2.5/25

35/350
20/200
15/150
12/120
7.5/75
5/50
3/30

-

35/350
25/250
20/200
15/150
10/100
-
-

-

50/500
50/500
50/500
25/250
-
-
-

-

80/800
80/800
80/800
-
-
-
-

-

110/1100
90/900
-
-
-
-
-

-

     
Mechanical Tests   Packing
Pull test on pins:
10 N in direction of pins according to IEC 60068-2-21
Vibration:
6 hours at 10...2000 Hz and 0.75mm displacement amplitude or 10g in accordance with IEC 60068-2-6
Low air density:
1kPa = 10 mbar in accordance with IEC 60068-2-13
Bump test:
4000 bumps at 390 m/sec2 in accordance with IEC 60068-2-29

Additional Information

MKS2-.047/63/5A
© 1994 - 2017 IBS Electronics Inc. All rights Reserved.    •    Call Now: 1-800-717-6475     Go to Top  Go to Top of Page