Ametherm SG170 Inrush Current Limiters 4 Ohms 8A
Thermistor NTC 4 Ohm 15% 2-Pin Radial 3000K
|Manufacturer's Part Number||SG170|
|Lead Time||42 Days|
|Factory Pack Quantity||1|
KATEMA / Ametherm / RTI# SG170 THERMISTOR, NTC, SURGE-GARD; Series:SG170; Thermistor Type:NTC; Resistance:4ohm; Tolerance, Resistance:1 15%; Beta Value:3000; Temp, Op. Max:+650C; Voltage, Operating:265V; Case Style:Radial; Current, Max:8A
SG Series Inrush Current Limiting Thermistors
Surge currents which occur when electrical circuits are switched on can cause serious damage to sensitive electronic components which may exceed their rated values unless the surge is controlled. Damaging surges may be prevented by using Surge-Gard inrush current limiters.
- High hot to cold resistance ratio
- 30 types of stocked Inrush Current Limiting (ICL) thermistor
The Surge Gard Inrush Current Limiting thermistor is a special power NTC thermistor which is connected in series with the load.
At "switch-on" the thermistor limits the current due to its relatively high cold resistance. As a result of current flow the thermistor self-heats, reducing it's resistance value and thus limiting damaging surge currents to the load.
|Brand: Ametherm / RTI / KATEMA|
|Current Rating: 8 A|
|Resistance: 4 Ohms|
|Tolerance: 15 %|
|Resistance @ 100% Max Current:|
|Case Diameter: 0.6 in|
|Case Width: 0.25 in|
|Manufacturer Part #: SG170|
|Click here to Download Datasheet I|