Country Flags IBS Electronics USA IBS Electronics Mexico IBS Electronics Philippines IBS Electronics China IBS Electronics Malaysia IBS Electronics India IBS Electronics Hong Kong IBS Electronics Singapore
Home > Passive Components > Transformers Audio & Signal > Line Matching Transformer > ETAL P3000 Telecom Transformer v.90 / v.92

ETAL P3000 Telecom Transformer v.90 / v.92

Be the first to review this product

Availability: In stock

Only 2 left

  • Buy 10 for $5.3600 each and save 25%

Quick Overview

ETAL P3000 TRANSFORMER, SMD, HYBRID For Communication,v.90bis. v.92bis. v.34bis Modems

ETAL P3000 Telecom Transformer v.90 / v.92

Double click on above image to view full picture

Zoom Out
Zoom In

More Views



Features Applications

∗ Surface mount ∗ V.34, V.90 and V.92 Modems
∗ Lead-free (Pb-free) ∗ Miniature DAA applications
∗ RoHS compliant ∗ Universal DAA applications
∗ 7mm seated height ∗ Notebook PC Fax/Modems
∗ Low loss ∗ CODEC interface
∗ Low Distortion
∗ 2-4 wire conversion
∗ IEC 950 and UL 60950 certified
∗ UL Recognized Component


P3000 is a microprofile passive hybrid module for
applications where reinforced insulation is required.
It features fully vacuum encapsulated construction
using materials conforming to UL94V-0 flammability
requirements. The part is compliant with RoHS
Directive 2002/95/EC, and suitable for lead-free
and conventional placement and reflow.

P3000 performs the functions of reinforced safety
barrier (3750Vrms), telephone line matching and 2-4
wire conversion. This component is designed
specifically for high speed full-duplex data
transmission where very low levels of distortion are
required. High performance is achieved by realizing
a very low noise floor at the receive port even when
the power sourced at the transmit port is high.
Circuit simplification is readily achieved as the
transmit, receive and line ports are fully floating and
galvanically isolated from each other.

P3000 is readily matched to complex reference
impedances. The transmit and receive frequency
responses are very flat (i.e. negligible 'twist') when
matched to complex impedances.
For best operation the module requires a transmit
drive from a high-quality low-impedance source
(«10Ω), and a high impedance receive load (47kΩ
nominal). These impedances may be directly
provided by datapumps.

P3000 is also useful for voice applications
requiring 2-4 wire conversion as its port
impedances are particularly suitable for CODECs.

P3000 is certified to IEC 950 and UL 60950.
P3000 is a UL Recognized Component, and is
supported by an IEC CB Test Certificate.

Additional Information

Manufacturer Part No P3000
Manufacturer: ETAL
Capacitance: 0µF
DC Resistance: 600ohm
External Depth: 12.7mm
Height [mm]: 7 mm
External Width: 17.6mm
Frequency Response Max: 4kHz
Frequency Response Min: 200Hz
Insertion Loss: 2dB
Isolation Voltage: 5.5kV
Lead Spacing: 9.2mm
Mounting Type: SMD
Pitch Spacing: 2.54mm
Return Loss: 17
Click here to Download Datasheet I
© 1994 - 2022 IBS Electronics Inc. All rights Reserved.    •    Call Now: 1-800-717-6475     Go to Top  Go to Top of Page