Country Flags IBS Electronics USA IBS Electronics Mexico IBS Electronics Philippines IBS Electronics China IBS Electronics Malaysia IBS Electronics India IBS Electronics Hong Kong IBS Electronics Singapore
Home > ICs > Discrete Semiconductors > Interface ICs > SN75C1154N Texas Instruments RS-232 Interface IC Quad RS232 20-DIP

SN75C1154N Texas Instruments RS-232 Interface IC Quad RS232 20-DIP

Be the first to review this product

Availability: In stock

Only 5 left


Quick Overview

Texas Instruments - Ti Sn75C1154N Dip IC Line Transmitter/Receiver 4TR 4TX 4RX 20-Pin PDIP
RS232 Transceiver IC; Supply Voltage Min:5V; Package/Case:20-PDIP; No. of Pins:20; Operating Temperature Range:00C to +700C; Leaded Process Compatible:Yes; No. of Drivers:4; No. of Receivers:4; Supply Voltage Max:12V

SN75C1154N Texas Instruments RS-232 Interface IC Quad RS232 20-DIP

Double click on above image to view full picture

Zoom Out
Zoom In

More Views


SN75C1154N Texas Instruments RS-232 Interface IC - TI SN75C1154N DIP Line Transmitter/Receiver 4TR 4TX 4RX 20-Pin PDIP

The SN65C1164 and SN75C1154 are low-power BiMOS devices containing four independent drivers and receivers that are used to interface data terminal equipment (DTE) with data circuit-terminating equipment (DCE). These devices are designed to conform to TIA/EIA-232-F. The drivers and receivers of the SN65C1154 and SN75C1154 are similar to those of the SN75C188 quadruple driver and SN75C189A quadruple receiver, respectively. The drivers have a controlled output slew rate that is limited to a maximum of 30 V/µs and the receivers have filters that reject input noise pulses of shorter than 1 µs. Both these features eliminate the need for external components.

The SN65C1154 and SN75C1154 have been designed using low-power techniques in a BiMOS technology. In most applications, the receivers contained in these devices interface to single inputs of peripheral devices such as ACEs, UARTs, or microprocessors. By using sampling, such peripheral devices usually are insensitive to the transition times of the input signals. If this is not the case, or for other uses, it is recommended that the SN65C1154 and SN75C1154 receiver outputs be buffered by single Schmitt input gates or single gates of the HCMOS, ALS, or 74F logic families.



  • Meet or Exceed the Requirements of TIA/EIA-232-F and ITU Recommendation V.28
  • Very Low Power Consumption . . .5 mW Typ
  • Wide Driver Supply Voltage . . .±4.5 V to ±15 V
  • Driver Output Slew Rate Limited to 30 V/µs Max
  • Receiver Input Hysteresis . . . 1000 mV Typ
  • Push-Pull Receiver Outputs
  • On-Chip Receiver 1-µs Noise Filter

Additional Information

© 1994 - 2022 IBS Electronics Inc. All rights Reserved.    •    Call Now: 1-800-717-6475     Go to Top  Go to Top of Page