Country Flags IBS Electronics USA IBS Electronics Mexico IBS Electronics Philippines IBS Electronics China IBS Electronics Malaysia IBS Electronics India IBS Electronics Hong Kong IBS Electronics Singapore
Home > Capacitors > Wima Capacitors FKP2 220PF 100V 5%

Wima Capacitors FKP2 220PF 100V 5%

Be the first to review this product

Availability: Request a Quote

$0.2400

Quick Overview

Capacitors FKP2 220P 100V 5%

Wima Capacitors FKP2 220PF 100V 5%

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

Capacitors FKP2 220PF 100V 5%

Wima Polypropylene (PP) Film and Foil Capacitors for Pulse Applications in PCM 5 mm

Electrical Data
Capacitance range:
33 pF to 0.033 µF (E12-values on request)
Rated voltages:
63VDC, 100VDC, 250VDC, 400VDC, 630VDC, 800VDC, 1000VDC
Capacitance tolerances:
±20%, ±10%, ±5%, ±2.5% (±2%, ±1.5% or ±1% available as precision capacitors subject to special enquiry)
Operating temperature range:
-55°C to +100°C
Test specifications:
IIn accordance with IEC 60384-13
Climatic test category:
55/100/56 in accordance with IEC
Insulation resistance
at +20°C:
> 5 x 105 M (mean value: 1 x 106 M)
Measuring voltage:
Ur = 63V: Utest = 50 V/1 min.
Ur > 100V: Utest = 100 V/1 min.
Dissipation factors at +20°C: tan
Test voltage: 2 Ur, 2 sec
Maximum pulse rise time:

1000 V/µsec for pulses equal to the rated voltage
Dielectric absorption: 0.05%
Temperature coefficient:
-200 x 10-6/°C (typical)
Voltage derating:

A voltage derating factor of 1.35% per K must be applied from +85°C for DC voltages and from +75°C for AC voltages
Reliability:
Operational life > 300000 hours
Failure rate < 5 fit (0.5 x Ur and 40°C)
at f C < 1000 µF 1000 pF < C < 4700 pF C > 4700 pF
1kHz
10kHz
100kHz
1 MHz
< 3 x 10-4
< 3 x 10-4
< 4 x 10-4
< 10 x 10-4
< 4 x 10-4
< 4 x 10-4
< 5 x 10-4
-
< 4 x 10-4
< 4 x 10-4
-
-
 
Mechanical Tests   Packing
Pull test on pins:
10 N in direction of pins according to IEC 60068-2-21
Vibration:
6 hours at 10...2000Hz and 0.75mm displacement amplitude or 10g in accordance with IEC 60068-2-6
Low air density:
1kPa = 10 mbar in accordance with IEC 60068-2-13
Bump test:
4000 bumps at 390 m/sec2 in accordance with IEC 60068-2-29

Additional Information

C1297
© 1994 - 2017 IBS Electronics Inc. All rights Reserved.    •    Call Now: 1-800-717-6475     Go to Top  Go to Top of Page