Country Flags IBS Electronics USA IBS Electronics Mexico IBS Electronics Philippines IBS Electronics China IBS Electronics Malaysia IBS Electronics India IBS Electronics Hong Kong IBS Electronics Singapore
Home > Power Management ICs > DALLAS DS2502 EPROM 1024 bits TO-92 PACKAGE

DALLAS DS2502 EPROM 1024 bits TO-92 PACKAGE

Be the first to review this product

Availability: In stock

Only 24 left

$1.0000
OR

Quick Overview

DALLAS (Maxim Integrated) DS2502 Series EPROM EPROM - OTP Memory IC 1Kb (1K x 1) 1-Wire® 15µs TO-92-3

DALLAS DS2502 EPROM 1024 bits TO-92 PACKAGE

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

The DS2502 1Kb Add-Only Memory identifies and stores relevant information about the product to which it is associated. This lot- or product-specific information can be accessed with minimal interface—for example, a single port pin of a microcontroller. The DS2502 consists of a factory-lasered registration number that includes a unique 48-bit serial number, an 8-bit CRC, and an 8-bit Family Code (09h) plus 1Kb of EPROM which is user-programmable. The power to program and read the DS2502 is derived entirely from the 1-Wire® communication line.

The DS2502 1Kb Add-Only Memory identifies and stores relevant information about the product to which it is associated. This lot- or product-specific information can be accessed with minimal interface—for example, a single port pin of a microcontroller. The DS2502 consists of a factory-lasered registration number that includes a unique 48-bit serial number, an 8-bit CRC, and an 8-bit Family Code (09h) plus 1Kb of EPROM which is user-programmable. The power to program and read the DS2502 is derived entirely from the 1-Wire® communication line.

Data is transferred serially via the 1-Wire protocol which requires only a single data lead and a ground return. The entire device can be programmed and then write-protected if desired. Alternatively, the part may be programmed multiple times with new data being appended to, but not overwriting, existing data with each subsequent programming of the device. Note: Individual bits can be changed only from a logical 1 to a logical 0, never from a logical 0 to a logical 1. A provision is also included for indicating that a certain page or pages of data are no longer valid and have been replaced with new or updated data that is now residing at an alternate page address. This page address redirection allows software to patch data and enhance the flexibility of the device as a stand-alone database. The 48-bit serial number that is factory-lasered into each DS2502 provides a guaranteed unique identity which allows for absolute traceability. The familiar TO-92 or SOIC or TSOC packages provide a compact enclosure that allows standard assembly equipment to handle the device easily for attachment to printed circuit boards or wiring. Typical applications include storage of calibration constants, maintenance records, asset tracking, product revision status, and access codes.

Key Features
  • Easily Add Traceability and Relevant Information to Any Individual System
    • 1k-Bit EPROM with Page-Level Write Protection and Guaranteed Unique 64-Bit ROM ID Chip for Absolute Traceability
    • 1024 Bits Electrically Programmable Read Only Memory (EPROM)
    • Unique, Factory-Lasered and Tested 64-Bit Registration Number (8-Bit Family Code + 48-Bit Serial Number + 8-Bit CRC Tester)
    • EPROM Partitioned into Four 256-Bit Pages for Randomly Accessing Packetized Data
    • Each Memory Page Can Be Permanently Write- Protected to Prevent Tampering
    • Device is an Add Only Memory Where Additional Data Can Be Programmed into EPROM Without Disturbing Existing Data
    • Architecture Allows Software to Patch Data by Superseding an Old Page in Favor of a Newly Programmed Page
    • 8-Bit Family Code Specifies DS2502 Communications Requirements to Reader
  • Minimalist 1-Wire Interface Lowers Cost and Interface Complexity
    • Reduces Control, Address, Data, Power, and Programming Signals to a Single Data Pin
    • Directly Connects to a Single Port Pin of a Microprocessor and Communicates at up to 16.3kb Per Second
    • Built-In Multidrop Controller Ensures Compatibility with Other 1-Wire Net Products o Presence Pulse Acknowledges When the Reader First Applies Voltage
    • Low Cost TO-92, SFN, or 8-Pin SO, SOT-23 (3 Pin), TSOC and WLP Surface Mount Package
  • Wide Voltage and Temperature Operating Ranges Provide Robust System Performance
    • Reads Over Voltage Range of 2.8V to 6.0V at -40°C to +85°C
    • Zero Standby Power Required
    • Programs at 11.5V to 12.0V from -40°C to +50°C


Dallas IC, EPROM, 1KBIT, SERIAL,

Memory Type:EPROM - OTP

Memory Size:1Kbit

EPROM Memory Configuration:1K x 8bit

Supply Voltage Min:2.8V

Supply Voltage Max:6V

Dallas Ds2502


EPROM; Memory Size:1024kbit; Supply Voltage Max.:6V; Package/Case:TO-92
1024 bits Electrically Programmable Read Only Memory (EPROM) communicates with the economy of one signal plus ground. Unique, factory-lasered and tested 64-bit registration number (8-bit family code + 48 - bit serial number + 8-bit CRC tester) assures absolute traceability because no two parts are alike Built-in multidrop controller ensures compatibility with other MicroLAN products. EPROM partitioned into four 256-bit pages for randomly accessing packetized data. Each memory page can be permanently write-protected to prevent tampering Device is an "add only" memory where

DS2502

Dallas - Dallas Ds2502

  • EPROM; Memory Size:1024kbit; Supply Voltage Max.:6V; Package/Case:TO-92
  • 1024 bits Electrically Programmable Read
  • Only Memory (EPROM) communicates with
  • the economy of one signal plus ground
  • 
  • Unique, factory-lasered and tested 64-bit
  • registration number (8-bit family code + 48-
  • bit serial number + 8-bit CRC tester) assures
  • absolute traceability because no two parts are
  • alike
  • 
  • Built-in multidrop controller ensures
  • compatibility with other MicroLAN products
  • 
  • EPROM partitioned into four 256-bit pages
  • for randomly accessing packetized data
  • 
  • Each memory page can be permanently
  • write-protected to prevent tampering
  • 
  • Device is an “add only” memory where

Data is transferred serially via the 1-Wire protocol which requires only a single data lead and a ground return. The entire device can be programmed and then write-protected if desired. Alternatively, the part may be programmed multiple times with new data being appended to, but not overwriting, existing data with each subsequent programming of the device. Note: Individual bits can be changed only from a logical 1 to a logical 0, never from a logical 0 to a logical 1. A provision is also included for indicating that a certain page or pages of data are no longer valid and have been replaced with new or updated data that is now residing at an alternate page address. This page address redirection allows software to patch data and enhance the flexibility of the device as a stand-alone database. The 48-bit serial number that is factory-lasered into each DS2502 provides a guaranteed unique identity which allows for absolute traceability. The familiar TO-92 or SOIC or TSOC packages provide a compact enclosure that allows standard assembly equipment to handle the device easily for attachment to printed circuit boards or wiring. Typical applications include storage of calibration constants, maintenance records, asset tracking, product revision status, and access codes.

Additional Information

DS2502
Click here to Download Datasheet I
© 1994 - 2017 IBS Electronics Inc. All rights Reserved.    •    Call Now: 1-800-717-6475     Go to Top  Go to Top of Page