Country Flags IBS Electronics USA IBS Electronics Mexico IBS Electronics Philippines IBS Electronics China IBS Electronics Malaysia IBS Electronics India IBS Electronics Hong Kong IBS Electronics Singapore
Home > Capacitors > Wima FKP2 Capacitor 1000PFD 100V

Wima FKP2 Capacitor 1000PFD 100V

Be the first to review this product

Availability: Request a Quote

$0.3500

Quick Overview

FKP2 Capacitor 1000PFD 100V

Wima FKP2 Capacitor 1000PFD 100V

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

FKP2 Capacitor 1000PFD 100V

Wima Polypropylene (PP) Film and Foil Capacitors for Pulse Applications in PCM 5 mm

Electrical Data
Capacitance range:
33 pF to 0.033 µF (E12-values on request)
Rated voltages:
63VDC, 100VDC, 250VDC, 400VDC, 630VDC, 800VDC, 1000VDC
Capacitance tolerances:
±20%, ±10%, ±5%, ±2.5% (±2%, ±1.5% or ±1% available as precision capacitors subject to special enquiry)
Operating temperature range:
-55°C to +100°C
Test specifications:
IIn accordance with IEC 60384-13
Climatic test category:
55/100/56 in accordance with IEC
Insulation resistance
at +20°C:
> 5 x 105 M (mean value: 1 x 106 M)
Measuring voltage:
Ur = 63V: Utest = 50 V/1 min.
Ur > 100V: Utest = 100 V/1 min.
Dissipation factors at +20°C: tan
Test voltage: 2 Ur, 2 sec
Maximum pulse rise time:

1000 V/µsec for pulses equal to the rated voltage
Dielectric absorption: 0.05%
Temperature coefficient:
-200 x 10-6/°C (typical)
Voltage derating:

A voltage derating factor of 1.35% per K must be applied from +85°C for DC voltages and from +75°C for AC voltages
Reliability:
Operational life > 300000 hours
Failure rate < 5 fit (0.5 x Ur and 40°C)
at f C < 1000 µF 1000 pF < C < 4700 pF C > 4700 pF
1kHz
10kHz
100kHz
1 MHz
< 3 x 10-4
< 3 x 10-4
< 4 x 10-4
< 10 x 10-4
< 4 x 10-4
< 4 x 10-4
< 5 x 10-4
-
< 4 x 10-4
< 4 x 10-4
-
-
 
Mechanical Tests   Packing
Pull test on pins:
10 N in direction of pins according to IEC 60068-2-21
Vibration:
6 hours at 10...2000Hz and 0.75mm displacement amplitude or 10g in accordance with IEC 60068-2-6
Low air density:
1kPa = 10 mbar in accordance with IEC 60068-2-13
Bump test:
4000 bumps at 390 m/sec2 in accordance with IEC 60068-2-29

Additional Information

C1184
© 1994 - 2017 IBS Electronics Inc. All rights Reserved.    •    Call Now: 1-800-717-6475     Go to Top  Go to Top of Page