Country Flags IBS Electronics USA IBS Electronics Mexico IBS Electronics Philippines IBS Electronics China IBS Electronics Malaysia IBS Electronics India IBS Electronics Hong Kong IBS Electronics Singapore
Home > Semiconductors > ICs > Operational Amplifiers - Op Amps > National Semiconductor LM2902N IC OP-Amp 1.2MHZ 14DIP

National Semiconductor LM2902N IC OP-Amp 1.2MHZ 14DIP

Be the first to review this product

Availability: In stock

Only 770 left

  • Buy 10 for $0.3500 each and save 23%
  • Buy 50 for $0.3000 each and save 34%
  • Buy 100 for $0.2500 each and save 45%
  • Buy 500 for $0.2300 each and save 49%
  • Buy 1000 for $0.2100 each and save 54%
  • Buy 2000 for $0.1900 each and save 58%

Quick Overview

LM2902N/NOPB National Semiconductor (Texas Instruments) General Purpose Amplifier Operational Amplifier, Quad, 4 Amplifier, ± 1.5V to ± 13V, DIP, 14 Pins 4 Circuit 14-DIP

National Semiconductor LM2902N IC OP-Amp 1.2MHZ 14DIP

Double click on above image to view full picture

Zoom Out
Zoom In

More Views


National Semiconductor / Texas Instruments LM2902N IC Quad Operational Amplifier (OP-Amp) DIP-14 Through Hole

These devices consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply or split supply over a wide range of voltages.



  • 2-kV ESD Protection for:
    • LM224K, LM224KA
    • LM324K, LM324KA
    • LM2902K, LM2902KV, LM2902KAV
    • Wide Supply Ranges
      • Single Supply: 3 V to 32 V
        (26 V for LM2902)
      • Dual Supplies: ±1.5 V to ±16 V
        (±13 V for LM2902)
    • Low Supply-Current Drain Independent of
      Supply Voltage: 0.8 mA Typical
    • Common-Mode Input Voltage Range Includes
      Ground, Allowing Direct Sensing Near Ground
    • Low Input Bias and Offset Parameters
      • Input Offset Voltage: 3 mV Typical
        A Versions: 2 mV Typical
      • Input Offset Current: 2 nA Typical
      • Input Bias Current: 20 nA Typical
        A Versions: 15 nA Typical
    • Differential Input Voltage Range Equal to
      Maximum-Rated Supply Voltage:
      32 V (26 V for LM2902)
    • Open-Loop Differential Voltage Amplification:
      100 V/mV Typical
    • Internal Frequency Compensation
    • On Products Compliant to MIL-PRF-38535,
      All Parameters are Tested Unless Otherwise
      Noted. On All Other Products, Production
      Processing Does Not Necessarily Include Testing
      of All Parameters.

Part Specification:

  • Number of Elements :Quad
  • Type :General Purpose
  • Common Mode Rejection Ratio :70dB
  • Unity Gain Bandwidth Product (Typ) :1.3MHz
  • Input Offset Voltage :7@5VmV
  • Voltage Gain in dB :100dB
  • Package Type :PDIP
  • Packaging :Tube
  • Power Supply Rejection Ratio :65dB
  • Slew Rate :0.4V/us
  • Rail/Rail I/O Type :No
  • Shut Down Feature :No
  • Power Supply Requirement :Single/Dual
  • Single Supply Voltage (Min) :3V
  • Single Supply Voltage (Typ) :5/9/12/15/18/24/28V
  • Single Supply Voltage (Max) :30V
  • Dual Supply Voltage (Min) :±1.5V
  • Dual Supply Voltage (Typ) :±3/±5/±9/±12V
  • Dual Supply Voltage (Max) :±15V
  • Power Dissipation :0.5W
  • Operating Temp Range :-40C to 125C
  • Operating Temperature Classification :Automotive
  • Technology :Bipolar
  • Mounting :Through Hole
  • Pin Count :14
  • Input Bias Current :150nA

Additional Information

Manufacturer: National Semiconductor (Acquired by Texas Instruments)
Product Category: Operational Amplifiers - Op Amps
Amplifier Type: General Purpose Amplifier
Number of Channels: 4 Channel
GBP - Gain Bandwidth Product: 1.2 MHz
SR - Slew Rate: 0.5 V/us
CMRR - Common Mode Rejection Ratio: 50 dB
Output Current per Channel: 30 mA
Ib - Input Bias Current: 250 nA
Vos - Input Offset Voltage: 7 mV
Supply Voltage - Max: 26 V
Package / Case: PDIP-14
Operating Supply Current: 3 mA
Maximum Operating Temperature: + 125 C
Minimum Operating Temperature: - 40 C
Click here to Download Datasheet I
Click here to Download Datasheet II
© 1994 - 2019 IBS Electronics Inc. All rights Reserved.    •    Call Now: 1-800-717-6475     Go to Top  Go to Top of Page