Country Flags IBS Electronics USA IBS Electronics Mexico IBS Electronics Philippines IBS Electronics China IBS Electronics Malaysia IBS Electronics India IBS Electronics Hong Kong IBS Electronics Singapore
Home > Electromechanical > Hardware > Plastic Parts > RICHCO LCBSBM-7-01A-RT Circuit Board Mounting Stand-Off Adhesive Backed

RICHCO LCBSBM-7-01A-RT Circuit Board Mounting Stand-Off Adhesive Backed

Be the first to review this product

Availability: In stock

Only 1500 left

  • Buy 10 for $0.4800 each and save 36%
  • Buy 50 for $0.3600 each and save 52%
  • Buy 100 for $0.2500 each and save 67%
  • Buy 500 for $0.1800 each and save 76%
  • Buy 1000 for $0.1500 each and save 80%
  • Buy 2000 for $0.1300 each and save 83%

Quick Overview

Richco - Essentra LCBSBM-7-01A-RT Board Support Snap Lock / Adhesive Nylon 0.437" (11.10mm) 7/16"

RICHCO LCBSBM-7-01A-RT Circuit Board Mounting Stand-Off Adhesive Backed

Double click on above image to view full picture

Zoom Out
Zoom In

More Views


RICHCO / Essentra LCBSBM-7-01A-RT Circuit Board Mounting Stand-Off Adhesive Backed

A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of aluminum, brass, or nylon.
LCBSBM-4-01 ART, 6.4mm High Nylon PCB Support for 3.18mm PCB Hole, 12.7 x 12.7mm Base

Miniature Adhesive Backed Supports
PCB supports moulded in nylon, with an adhesive covered base which is protected by a removable strip until fitting
The board to be supported is retained securely by the locking barb, but may be removed when required
The support can be permanently fixed to most smooth and clean surfaces, due to the good retention properties of the adhesive
As the supports require no fixing screws they are particularly useful where a tapped support pillar cannot be used, e.g. on the rear of front panels
Working temperature range: -20°C to +90°C
Colour is natural
Base 12.7 x 12.7mm
PCB Thickness 1.6mm
Hole dia 3.18mm
Since 1954 Richco specialized in manufacturing quality plastic fasteners, wire management devices, circuit board hardware, and custom components.

Essentra manufacturers and supplies; namely millions of small but essential components which often play a critical enabling role in the products of the Company’s customers, everywhere and every day. Essentra is a leading international supplier of specialty plastic and fiber products.

Essentra's acquisition of Richco is consistent their vision for 2015 by complementing balanced organic growth with value-added acquisitions.

Additional Information

Manufacturer: Essentra / Richco
Spacer Length : 0.438 in (11.1 mm)
Hole A Fix Type : Snap Lock
Hole B Fix Type : Adhesive
Hole Diameter A : 0.125 in (3.2 mm)
Maximum Panel Thickness A : 0.062 in (1.6 mm)
Base Length : 0.50 in (12.7 mm)
Base Width : 0.50 in (12.7 mm)
Locking Head Height A : 0.34 in (8.6 mm)
Color : Natural
Full Material : Nylon 6/6
Material Flammability Standard : UL94 V-2
Base Material : Acrylic Based Adhesive
Operating Temperature Range : 32 - 185 °F (0 - 85 °C)
Material : Nylon
© 1994 - 2019 IBS Electronics Inc. All rights Reserved.    •    Call Now: 1-800-717-6475     Go to Top  Go to Top of Page